NeverSoft™ is a solar powered automatic air pressure management pump cap that replaces the existing valve cap on your inflatable boat tubes. It continuously monitors and maintains your tube pressure so your boat is always ready when you are.
Please see the “How it Works” tab on this website.
One cap per chamber. Most inflatable boats have 3 to 7 chambers. Check your owner’s manual or count your existing valve caps to determine how many you need.
Some inflatables have their maximum tube pressure listed by the valve. If not, consult with a dealer who sells your boat brand. You may also reference the table at the bottom of this page. Please note that the information on this table is provided for guidance only and has not been verified with all inflatable boat manufacturers. Please read disclaimer.
If the boat is covered while not in use, the fully charged battery will continue to operate the pump (if needed) until the boat is uncovered for its next use.
Flashing LEDs during the day means the battery is charging.
Yes. Every NeverSoft™ cap includes a built-in 4 PSI pressure relief valve that automatically releases excess pressure to prevent tube damage.
No. NeverSoft™ is designed to float.
NeverSoft™ is available in three valve versions — Halkey-Roberts, Summit, Leafield C7/D7, and Zodiac Z Nautic.
If you are unsure of the valve type of your boat, either check the boat’s owner manual or contact an inflatable boat dealer who sells your brand. You may also reference the table at the bottom of this page. Please note that the information on this table is provided for guidance only and has not been verified with all inflatable boat manufacturers. Please read Disclaimer.
Yes. As long as your boat uses one of the three compatible valve types, NeverSoft™ will work regardless of the age of your boat. It is an ideal retrofit upgrade for existing boats.
Yes. NeverSoft™ works with any inflatable tube material. The valve type determines compatibility, not the tube material.
Installation is simple — Simply unscrew your current cap and screw on the NeverSoft™ cap. NeverSoft™ screws onto your existing valve stem exactly like your current valve cap. No tools required. Installation takes seconds per cap.
Yes. Before first use you select the pressure mode that matches your boat manufacturer’s recommended tube pressure. This is a one-time setup. Refer to the Installation and Programming tab for instructions.
Yes. NeverSoft™ maintains pressure continuously whether your boat is stored, on a trailer, or on the water.
Consistently maintained pressure is the single most important factor in inflatable boat tube longevity. Under-inflated tubes flex excessively causing delamination and seam stress — the leading cause of early tube failure. Over-inflation risks blowouts. NeverSoft™ keeps pressure in the optimal range at all times.
Properly inflated tubes maximize hull rigidity which directly improves fuel efficiency, top speed, stability, and ride comfort. Many boat owners notice a significant performance improvement simply from consistently correct tube pressure.
Yes. NeverSoft™ monitors and maintains each chamber independently, and the system auto-balances pressure between chambers for a stable and even ride.
NeverSoft™ is available through authorized inflatable boat dealers across the United States and Canada. Use the dealer locator on cse-marine.com to find a dealer near you.
NeverSoft™ is available in light gray, dark gray, and black to complement your boat’s color scheme.
Yes. NeverSoft™ is available through authorized dealers in Canada and select international markets. Contact us at cse-marine.com for international purchasing options.
|
|
||||
|
|
Halkey-
Roberts/
|
|
|
Recommende
d
|
|
Manufacturer
|
Summit
|
Leafiel
d
|
Zodia
c
|
PSI
|
|
AB Inflatables (White Plunger Valve Only)
|
X
|
|
|
3.0
|
|
Achilles
|
|
X
|
|
2.8
|
|
AirShip
|
|
X
|
|
|
|
Apex Boats
|
|
X
|
|
3.0 – 3.5
|
|
Aquaform Inflatables
|
X
|
|
|
|
|
Aquascan Yacht Tenders
|
X
|
|
|
|
|
Argos Nautic
|
|
X
|
|
2.5 – 3.5
|
|
Brig Inflatables
|
X
|
X
|
|
3.0
|
|
Caribe
|
X
|
|
|
2.9
|
|
East Marine
|
X
|
|
|
3.5
|
|
Falcon Inflatables
|
X
|
|
|
3.6
|
|
Fluid
|
|
X
|
|
3.4
|
|
Gala (White Plunger Valve Only)
|
X
|
|
|
3.0
|
|
Gemini Marine
|
X
|
|
|
|
|
Grand Inflatable Boats
|
|
X
|
|
2.15 – 3.0
|
|
Highfield
|
X
|
|
|
3.5
|
|
InMar Inflatable Boats
|
|
X
|
|
3.2
|
|
Mercury
|
X
|
|
|
|
|
Northstar
|
|
X
|
|
2.6
|
|
Novurania
|
|
X
|
|
3.0
|
|
Pascoe International
|
|
X
|
|
|
|
Polaris Inflatable Boats
|
|
X
|
|
|
|
Rayglass – Protector
|
X
|
X
|
|
|
|
Rough Neck Marine
|
|
X
|
|
|
|
SACS Marine
|
X
|
|
|
|
|
Sealegs
|
|
X
|
|
2.0
|
|
Skipper
|
|
X
|
|
|
|
Technohull
|
|
X
|
|
|
|
Tiger
|
|
X
|
|
2.5 – 3.5
|
|
Tornado Boats Int’l
|
|
X
|
|
|
|
Walker Bay
|
X
|
X
|
|
|
|
Williams Jet Tenders
|
|
X
|
|
3.6
|
|
Zar Formenti Mini
|
|
X
|
|
|
|
Zodiac / Avon – Year 2000 +
|
|
|
X
|
3.4
|